Hisense Refrigerator

User Manual & Installation Guide

French Door 600L Capacity

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Tape measure
  • Water line kit (for ice maker models)

Step-by-Step Installation

  1. Choose Installation Location: Select a location near electrical outlet with proper ventilation space around the refrigerator.
  2. Remove Packaging Materials: Remove all shipping materials, tapes, and protective films from interior and exterior.
  3. Level the Refrigerator: Adjust the leveling legs to ensure the refrigerator is perfectly level from front to back and side to side.
  4. Connect Water Supply: For ice maker models, connect water supply line to the water inlet valve using approved water line kit.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Clearance Check: Ensure minimum 2-inch clearance at back and sides for proper ventilation and door opening.
  7. Initial Setup: Allow refrigerator to stand upright for 4 hours before plugging in. Set temperature controls and run initial ice maker cycle.
Warning: Professional installation recommended for water line connections to prevent leaks and maintain warranty coverage.

Specifications

Model Series HRF600D4SFF
Type French Door Refrigerator
Color Stainless Steel / Black Stainless
Total Capacity 600 Liters
Fresh Food Capacity 396 Liters
Freezer Capacity 204 Liters
Noise Level 38 dB
Control Type Digital Touch Controls with LED Display
Energy Rating A++ (Highly Efficient)
Annual Energy Consumption 320 kWh/year
Power Requirements 220-240V, 50Hz, 1.5A
Dimensions (HxWxD) 178 x 91 x 74 cm
Weight 98 kg
Ice Maker Built-in Automatic Ice Maker

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Compressor Warranty: 10 years on inverter compressor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Hisense Customer Service at 1-800-242-0000 or visit Hisense.com

Key Features

Inverter Compressor Technology

Hisense's advanced inverter compressor adjusts cooling power based on demand, providing consistent temperatures while reducing energy consumption and operating noise.

Total No Frost

Advanced cooling system prevents frost buildup in both refrigerator and freezer compartments, eliminating the need for manual defrosting and maintaining optimal humidity levels.

Multi-Air Flow System

Multiple vents distribute cool air evenly throughout the refrigerator, ensuring consistent temperatures in every section and keeping food fresher for longer.

HygieneFresh+

Advanced air purification system with multi-layer filtration removes bacteria and odors, keeping the refrigerator interior clean and food protected.

Smart Diagnosis

Built-in smart diagnosis system helps identify issues and provides error codes for quick troubleshooting and efficient service.

Door Cooling+

Special cooling vents in the doors ensure optimal temperature for items stored in door compartments, particularly beverages and condiments.

Temperature Zones Explained

Fresh Food Zone

Main compartment maintained at ideal 2-4°C for daily food items

Crisper Drawers

Humidity-controlled drawers for fruits and vegetables with separate settings

Freezer Zone

Deep freeze compartment at -18°C for long-term food storage

Chiller Drawer

Dedicated drawer for meat and fish at near-freezing temperatures

Door Storage

Specially cooled compartments for beverages and frequently used items

Ice & Water Dispenser

Convenient through-door access to chilled water and ice cubes

Troubleshooting

Problem Possible Cause Solution
Refrigerator not cooling Power issue, temperature setting incorrect Check power supply, verify temperature settings are correct
Unusual noises Uneven leveling, items vibrating, compressor issues Level the refrigerator, secure items inside, check for obstructions
Water leakage Clogged defrost drain, water line connection issues Clear defrost drain, check water line connections
Ice maker not working Water supply issue, freezer temperature too warm Check water supply, ensure freezer temperature is -18°C or lower
Excessive frost buildup Door not sealing properly, frequent door openings Check door seals, minimize door openings, ensure proper closure
Display not working Power issue, control board malfunction Check power connection, reset circuit breaker, contact service

Error Codes

  • E1: Temperature sensor failure - Contact service center
  • E2: Communication error - Power cycle refrigerator
  • E3: Defrost system error - Check defrost heater and sensor
  • E4: Fan motor error - Check evaporator and condenser fans
  • E5: Door open alert - Ensure doors are properly closed
  • E6: Compressor error - Contact service center

Manual Downloads

Current Model Manuals

HRF600D4SFF

600L French Door Refrigerator

HRF550D4SFF

550L Side-by-Side Refrigerator

HRF480D4SFF

480L Bottom Freezer Refrigerator

HRF700D4SFF

700L Smart Refrigerator

Popular Previous Models

HRF450N4SFF

450L No Frost Refrigerator

HRF380D4SFF

380L Top Freezer Refrigerator

HRF520N4SFF

520L Inverter Refrigerator

HRF650D4SFF

650L French Door with Water Dispenser

Note: For models not listed here, please visit the Hisense Support Website for complete documentation.